Activating Canon MG3222 on Windows:

1. Prepare Your Printer:

   • Unbox and set up your Canon MG3222 printer .
   • Connect it to a power source, turn it on, and install ink cartridges.

2. Connect to Wi-Fi:

   • Use the printer's control panel to navigate to the wireless or network settings.
   • Select your Wi-Fi network and enter the Wi-Fi password.

3. Download and Install Drivers:

   • Visit the Canon support website ( https://www.usa.canon.com/ ) and enter your printer model (MG3222).
   • Download the latest drivers and software for your Windows operating system.

4. Run the Installer:

   • Locate the downloaded file and run the installer.
   • Follow the on-screen instructions to install the drivers and software.

5. Connect the Printer to Computer:

   • During the installation, you may be urged to connect the printer to your computer. Connect it using a USB cable.

6. Complete the Setup:

   • Follow any additional prompts to complete the setup process.
   • If you are prompted to choose a connection method, select "Wireless Connection."

7. Remove USB Cable (if applicable):

   • Once the wireless setup is complete, you can disconnect the USB cable if you used it for the initial setup.

8. Test Print:

   • Print a test page to ensure that the wireless connection is established correctly.

Activating Canon MG3222 on Mac:

The steps for Mac are generally similar to those for Windows, but there might be slight differences in the menu options. Here's a brief overview:

1. Follow steps 1-3 from the Windows section.

2. Download and install the drivers and software for Mac from the Canon support website.

3. During the installation, connect the printer to your Mac using a USB cable when prompted.

4. Complete the setup process, and when asked to choose a connection method, select "Wireless Connection."

5. Once the wireless setup is complete, disconnect the USB cable.

6. Test print to verify that the wireless connection is functioning correctly.

Activating Canon MG3222 on Mobile Devices (iOS/Android):

1. Follow steps 1-3 from the Windows section.

2. Download and install the Canon PRINT Inkjet/SELPHY app from the App Store (iOS) or Google Play Store (Android).

3. Open the app and follow the on-screen instructions to add your Canon MG3222 printer .

4. Complete the setup process, including connecting the printer to your Wi-Fi network.

5. Test print from your mobile device to ensure that the wireless connection is established correctly.

Always refer to the printer's user manual and the Canon support website for model-specific instructions and troubleshooting tips.